(eng): A smart oscilloscope based on Trenz Electronic TEBF0808 carrier board with Trenz Electronic TE0808-04-6EB21A System on Module (SoM) and with Analog Devices AD-FMCDAQ2-EBZ evaluation board. The system is based on the example in HDL package provided by Analog Devices for Xilinx tools in version 2018.2. The package is downloadable from Analog Devices GitHub. The sample rate of the system is 1 GS/s. It can capture up to 939 000 000 samples that corresponds to 939 ms. If the system is configured to capture one input channel, it can store up to the maximal number of samples. But when the oscilloscope is set to capture two input channels at the same time, of course, it can store only a half of the maximum number of samples per one channel. The original design is modified to be able to run continuously. It supports a hardware trigger and the system can pre-buffer samples before the trigger is activated. The size of this buffer is configurable, the maximal number of samples stored in this buffer is 524288. The oscilloscope is extended with the hardware accelerated signal measurement unit (SMU).